From mboxrd@z Thu Jan 1 00:00:00 1970 From: Philip Mak Date: Fri, 15 Feb 2002 18:39:23 +0000 Subject: Re: [LARTC] Route works, but ping time is 1000 ms Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org I'm not sure what I did, but everything seems to be working correctly now. Well, I still have one problem: If the machine reboots, I lose all my settings. Can anyone point me to a good reference of how to make these settings take effect at boot time? I assume there's a better way other than putting the commands into /etc/rc.d/rc.local. Script started on Fri Feb 15 13:34:13 2002 [root@lina route]# tail -1 /etc/iproute2/rt_tables 200 pnap [root@lina route]# ip route show 66.28.98.32/27 via 66.28.98.34 dev eth1 66.28.98.32/27 dev eth1 scope link 64.94.46.0/23 dev eth0 scope link 64.94.46.0/23 via 64.94.47.253 dev eth0 127.0.0.0/8 dev lo scope link default via 66.28.98.34 dev eth1 [root@lina route]# ip rule show 0: from all lookup local 32765: from 64.94.46.199 lookup pnap 32766: from all lookup main 32767: from all lookup 253 [root@lina route]# ip route show table pnap default via 64.94.47.253 dev eth0 [root@lina route]# Script done on Fri Feb 15 13:34:40 2002 _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/