From mboxrd@z Thu Jan 1 00:00:00 1970 From: Martin Devera Date: Fri, 15 Feb 2002 20:49:25 +0000 Subject: Re: Re[2]: [LARTC] problems with IMQ + Netfilter IP_LIMIT patch from Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org > Wipld (traffic monitor tool )don't show any information on eth0/1, ntop > neigther. > Also i attemp to configure both programs tu get imq information: > # ntop -i imq > ntop: listening on imq > ntop: unknown physical layer type 0xffff you can't use imq for anything else than as qdisc placeholder. There is nothing what should prevent you from looking at interface. I don't know ntop nor wipld so I don't know what could be wrong. You have to look into it and tell me whether the problem is with packet sniffing (try tcpdump on ethX) or with cat /proc/net/dev devik _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/