From mboxrd@z Thu Jan 1 00:00:00 1970 From: bert hubert Date: Wed, 20 Feb 2002 15:52:31 +0000 Subject: Re: [LARTC] tc isn't working Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Wed, Feb 20, 2002 at 11:37:03AM -0300, Michel Angelo da Silva Pereira wrote: > Hi all, I'm using this script to do some traffic control on my network. > I wanna to limit the traffic to 64kb on my network interface that > goes to Internet, but the script isn't working. > When I try do to a download, the bandwidth goes to 11MB/s. > The rule need to be added on the eth0 (outgoing traffic) or the > eth1 (incoming traffic from internet called inside). If you are in the private network, you need to shape traffic going out on eth1 to your private computer. Remember, you can only shape traffic *going* out! -- http://www.PowerDNS.com Versatile DNS Software & Services http://www.tk the dot in .tk Netherlabs BV / Rent-a-Nerd.nl - Nerd Available - Linux Advanced Routing & Traffic Control: http://ds9a.nl/lartc _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/