From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ben Date: Thu, 28 Feb 2002 23:18:43 +0000 Subject: Re: [LARTC] HTB: Filtering flat out not working :( Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org I've seen examples like this, but what I'm not clear on is if the filter handle has to be the same as the fwmark or if the flowid has to be :. Either way seems not right, but nothing else seems to make sense, based on the examples I've seen. On Fri, 1 Mar 2002, Viktor Kemmet wrote: > # Mark Packets according to destination port number > iptables -I OUTPUT -t mangle -p udp --destination-port 5003 -j MARK --set-mark 3 > iptables -I OUTPUT -t mangle -p udp --destination-port 5002 -j MARK --set-mark 2 > iptables -I OUTPUT -t mangle -p udp --destination-port 5001 -j MARK --set-mark 1 > > $TC class change $EGDEV classid 1:1 dsmark mask 0x3 \ > value 0xb8 > #becomes AF11 > $TC class change $EGDEV classid 1:2 dsmark mask 0x3 \ > value 0x28 > #becomes AF21 > $TC class change $EGDEV classid 1:3 dsmark mask 0x3 \ > value 0x48 > > $TC filter add $EGDEV parent 1:0 protocol ip prio 4 handle 1 fw flowid 1:1 > $TC filter add $EGDEV parent 1:0 protocol ip prio 4 handle 2 fw flowid 1:2 > $TC filter add $EGDEV parent 1:0 protocol ip prio 4 handle 3 fw flowid 1:3 _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/