From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stef Coene Date: Fri, 01 Mar 2002 07:50:27 +0000 Subject: Re: [LARTC] HTB: Filtering flat out not working :(g Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org > Perhaps i'm supposed to use this complicated route classifier of tc? Eg. > have all packets assigned a realm thru ip route, then use tc to catch these > packets? This is more complicated, and I don't wish to mess with my routing > (i'm using "route", not "ip route", are these even compatible?). Ideally > i'd like to be able to simply grab the MARKed packets with tc, let me know > if this is possible. > > One additional question from my previous email that didn't get answered, > that i'd like to know about: after adding the SFQ classes to the leafs of > the HTB (see first post with the script in it), am I supposed to be > attaching the filters to the 10: handles of the SFQs, or stay the way it > is, using the HTB children eg. 1:10 ? If a packet is outted in a class with a filter, the packet is also queued in the qdisc that belongs to that class. This is normally a FIFO qdisc. But you can replace it with a SFQ qdisc. So you don't need extra filter to put the traffic in the SFQ qdisc. All packets of the class will also enter the qdisc. Stef -- stef.coene@docum.org More QOS info : http://www.docum.org/ Title : "Using Linux as bandwidth manager" _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/