From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stef Coene Date: Fri, 08 Mar 2002 07:53:51 +0000 Subject: Re: [LARTC] HTB + tc line Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Friday 08 March 2002 00:55, LuisMi wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > I did here... > [root@echelon root]# tc class add dev eth0 parent 1: classid 1:1 htb rate > 10mbps > > and then... > > [root@echelon root]# tc -s -d class show dev eth0 > class htb 1:1 root prio 0 rate 80Mbit ceil 80Mbit burst 106440b/8 mpu 0b > cburst 106440b/8 mpu 0b quantum 60000 level 0 > Sent 0 bytes 0 pkts (dropped 0, overlimits 0) > lended: 0 borrowed: 0 giants: 0 injects: 0 > tokens: 8316 ctokens: 8316 > > My question is... > rate 80Mbit ceil 80Mbit????????????????????? That is OK. 10mbps = 10mbyte/s = 80 mbit/s = 80Mbit And you provided no ceil so ceil = rate. Stef -- stef.coene@docum.org More QOS info : http://www.docum.org/ Title : "Using Linux as bandwidth manager" _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/