From mboxrd@z Thu Jan 1 00:00:00 1970 From: LuisMi Date: Mon, 11 Mar 2002 23:09:23 +0000 Subject: Re: [LARTC] HTB + tc line Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Fri, 8 Mar 2002, Stef Coene wrote: > On Friday 08 March 2002 00:55, LuisMi wrote: > > -----BEGIN PGP SIGNED MESSAGE----- > > Hash: SHA1 > > > > I did here... > > [root@echelon root]# tc class add dev eth0 parent 1: classid 1:1 htb rate > > 10mbps > > > > and then... > > > > [root@echelon root]# tc -s -d class show dev eth0 > > class htb 1:1 root prio 0 rate 80Mbit ceil 80Mbit burst 106440b/8 mpu 0b > > cburst 106440b/8 mpu 0b quantum 60000 level 0 > > Sent 0 bytes 0 pkts (dropped 0, overlimits 0) > > lended: 0 borrowed: 0 giants: 0 injects: 0 > > tokens: 8316 ctokens: 8316 > > > > My question is... > > rate 80Mbit ceil 80Mbit????????????????????? > That is OK. > 10mbps = 10mbyte/s = 80 mbit/s = 80Mbit > And you provided no ceil so ceil = rate. well, I was talking about 10 megabits not megabytes. How can I tell 10 megabits to tc command line? Thanks LuisMi -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iEYEARECAAYFAjyNOSQACgkQvQHLTzrFJlddFQCcC3vyejmKlnzhC1Ebpoh+qSAK eo0AoI4qZwUdxMdfwK/9lkzgyA+vXUpj =wubt -----END PGP SIGNATURE----- _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/