From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stef Coene Date: Wed, 13 Mar 2002 17:24:26 +0000 Subject: Re: [LARTC] Basic Question on TBF Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Wednesday 13 March 2002 18:22, Rajesh Revuru wrote: > Hi alll.. > > This is Very basic question on TBF. > > The rate specified for Token bucket filter is to > throttle the extra packets... > > For example... > If my Etho interface receives 5mb of traffic > and if i have this following command... This means you want to incoming bandwith. > tc qdisc add dev eth0 root tbf 1mbit burst 10k latency > 350ms This will limit the outgoing bandwith to 1mbit. > Does this mean that remaining 4 mb will be > dropped..??? > But this is not happening all the 5mb is reaching the > Destination.. And now you want to limit the bandwith you send ? Do you want to shape the incoming or the outgoing packets? You can only shape packets you send to somewhere else. Stef -- stef.coene@docum.org "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/