From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Nils Lichtenfeld" Date: Fri, 22 Mar 2002 14:18:08 +0000 Subject: Re: [LARTC] How to mark a device not to be used with IMQ? Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hello Martin! > all are used everytime. > you have to use filters to direct unneeded packets > into fake queue (X:0 in case on HTB, some hiprio > band in case of prio ...). I understand what you mean... but i thought there has to be a way from what I read on the IMQ-site (http://luxik.cdi.cz/~devik/qos/imq.htm): --- snipp --- Each non-marked skb is intercepted in dev_queue_xmit and queued to IMQ if it is up. Immediately it tries to dequeue it (software pump). --- snapp --- "Each non-marked skb" <-- Thats what made me think that there is a way to "mark" a device... Thanks! Greetings Nils _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/