From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Charles Williams" Date: Sun, 31 Mar 2002 19:03:52 +0000 Subject: Re: [LARTC] Hosting script Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org ----- Original Message ----- From: "Charles Williams" To: "Stef Coene" ; Sent: Sunday, March 31, 2002 8:57 PM Subject: Re: [LARTC] Hosting script > > ----- Original Message ----- > From: "Stef Coene" > To: "Charles Williams" ; > > Sent: Saturday, January 05, 1980 4:41 AM > Subject: Re: [LARTC] Hosting script > > > >> >remark 3 : weight 1 is very low for the classes > >Calculate the weight from the rate : weight = rate / 10. Also, is the formula meant for Kbit or Mbit rates? I would imagine Mbit. chuck > > > >But what do you want to do with the scipt? There is already a cbq-script > >configuration : http://freshmeat.net/projects/cbq.init/ > > > >Stef > > Stef, > > This is for a hosting company data center (maybe) and will be controlling > the entire bandwidth for the 34Mbps line for that section of the data > center. > > Also, thanks for the link to the script. I'll take a look at it later. I > wanted to make sure I had this down without the script before hand though so > that I KNOW what's going on. > > thanks, > chuck > > > _______________________________________________ > LARTC mailing list / LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ > _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/