From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mihai RUSU Date: Thu, 04 Apr 2002 07:45:09 +0000 Subject: [LARTC] typo ? Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hi While reading the HOWTO (pdf downloaded and printed last night) I have noticed a little strange thing. In the 9.2.1 chapter, explaining the pfifo_fast qdisc, it is shown a TOS field mapping table and also it appears a command line version: "The last column shows the result of the default priomap. On the commandline, the default priomap looks like this: 1, 2, 2, 2, 1, 2, 0, 0 , 1, 1, 1, 1, 1, 1, 1, 1 This means that priority 4, for example, gets mapped to band number 1. The priomap also allows you to list higher priorities (> 7) which do not correspond to TOS mappings, but which are set by other means." The numbers on the command line version are 16, thus I presume its a one to one corespondation to the table, only that it is completly different. I dont see any explanation why it is like that. Shouldnt that be: 1,2,1,1,2,2,2,2,0,0,0,0,1,1,1,1 ? Thanks ---------------------------- Mihai RUSU Disclaimer: Any views or opinions presented within this e-mail are solely those of the author and do not necessarily represent those of any company, unless otherwise specifically stated. _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/