From mboxrd@z Thu Jan 1 00:00:00 1970 From: Diego Almeida Date: Fri, 05 Apr 2002 16:03:23 +0000 Subject: Re: [LARTC] How to share limited link ... Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lartc@vger.kernel.org Not... If the client 1 this not using its link, client 2 does not obtain to use link of client 1, the two always is limited 64kbit... Em Sex 05 Abr 2002 12:52, voc=EA escreveu: > On Friday 05 April 2002 16:42, Diego Almeida wrote: > > Hello , i have one 128kbit link , and i need share this link with 2 > > clients , client 1 is 10.100.100.2 and client 2 is 10.100.100.3 , i want > > limit client 1 with 64k and client 2 too. But if client 1 is noting usi= ng > > your 64k , forward your link to client 2 and vice-versa. I tried this: > > ./tc qdisc del root dev eth0 > > ./tc qdisc add dev eth0 root handle 1: cbq bandwidth 10mbit avpkt 1000 > > ./tc class add dev eth0 parent 1:0 classid 1:2 cbq bandwidth 10mbit rate > > 128kbit allot 1514 maxburst 20 avpkt 1000 bounded prio 1 > > ./tc class add dev eth0 parent 1:2 classid 1:4 cbq bandwidth 10mbit rate > > 64kbit allot 1514 maxburst 20 avpkt 1000 prio 1 > > ./tc class add dev eth0 parent 1:2 classid 1:5 cbq bandwidth 10mbit rate > > 64kbit allot 1514 maxburst 20 avpkt 1000 prio 1 > > ./tc filter add dev eth0 parent 1:0 protocol ip prio 100 u32 match ip d= st > > 10.100.100.2 flowid 1:4 > > ./tc filter add dev eth0 parent 1:0 protocol ip prio 100 u32 match ip d= st > > 10.100.100.3 flowid 1:5 > > > > > > Thank's a lot..... > > Euh, the commands seems ok for me. So, is it not working ???? > > Stef --=20 Diego Almeida diego dot sl at email dot com dot br _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/