From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mihai RUSU Date: Wed, 10 Apr 2002 15:26:28 +0000 Subject: [LARTC] sfq, queue len and dropped packets Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hi If I use sfq qdisc on a CBQ class I get a lot of dropped packets and the backlog itr almost always to its full value: 128. From the HOWTO I understand that the queue is at 128 packets, and SFQ shows 128/1024 flows , but how can I increase that value ? I have tried ip link set txqueuelen but this only increases the tx queue on the interface. qdisc sfq d468: quantum 1514b limit 128p flows 128/1024 perturb 10sec Sent 373321530 bytes 477032 pkts (dropped 120119, overlimits 0) backlog 120p How can I increase that 128p limit ? Thanks ---------------------------- Mihai RUSU Disclaimer: Any views or opinions presented within this e-mail are solely those of the author and do not necessarily represent those of any company, unless otherwise specifically stated. _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/