From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stef Coene Date: Wed, 10 Apr 2002 16:19:28 +0000 Subject: Re: [LARTC] sfq, queue len and dropped packets Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Wednesday 10 April 2002 17:26, Mihai RUSU wrote: > Hi > > If I use sfq qdisc on a CBQ class I get a lot of dropped packets and the > backlog itr almost always to its full value: 128. From the HOWTO I > understand that the queue is at 128 packets, and SFQ shows 128/1024 flows > , but how can I increase that value ? I have tried ip link set txqueuelen > but this only increases the tx queue on the interface. > > qdisc sfq d468: quantum 1514b limit 128p flows 128/1024 perturb 10sec > Sent 373321530 bytes 477032 pkts (dropped 120119, overlimits 0) > backlog 120p > > How can I increase that 128p limit ? You can find it on www.docum.org under FAQ. You need to change the kernel source to do so. Stef -- stef.coene@docum.org "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/