From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stef Coene Date: Wed, 24 Apr 2002 11:50:58 +0000 Subject: Re: [LARTC] Fwmark problem - policy routing does not work. Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org > Yes, they do. > I am also sure now, that marking is working: > I have tried the same on another host that uses a gateway to access the > internet, but has several ips on the net. If i do not enter the route (via > option) the packets are not reaching their destination, if i am creating > those as a given user, as all other user it does work. If i give the via > option in the "ip route add table thilo src ....." command, the packets are > reaching their destination again - yet even though i have given the source > ip that should have been used, it is still using the primary one. > > Could this be a bug in the routing code? I can only help you with the marking stuff :( Stef -- stef.coene@docum.org "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/