Re: [Fwd: Re: [LARTC] borrowing only from parent]

[Anton Yurchenko <phila@dg.net.ua>]

Hello,

After your explaining now I think I get the meaning of htb options and 
here is my config , which still sadly doesnt work. Downloads from 
srchost1 and srchost2 go at full speed, and are not shaped. Though 
counters for respective classes increase.

tc -s -d show class dev eth0
-------------------------------------

class htb 1:101 parent 1:1 prio 0 rate 40Kbit ceil 100Kbit burst 1650b/8 mpu 0b cburst 1727b/8 mpu 0b quantum 512 level 0 
 Sent 0 bytes 0 pkts (dropped 0, overlimits 0) 
 lended: 0 borrowed: 0 giants: 0 injects: 0
 tokens: 628545 ctokens: 263144

class htb 1:1 root prio 0 rate 100Kbit ceil 100Kbit burst 1599b/8 mpu 0b cburst 1599b/8 mpu 0b quantum 1280 level 3 
 Sent 3131025 bytes 23836 pkts (dropped 0, overlimits 0) 
 rate 281bps 3pps 
 lended: 751 borrowed: 0 giants: 0 injects: 0
 tokens: -8719 ctokens: -8719

class htb 1:100 parent 1:1 prio 0 rate 60Kbit ceil 100Kbit burst 1675b/8 mpu 0b cburst 1727b/8 mpu 0b quantum 768 level 0 
 Sent 36068 bytes 504 pkts (dropped 0, overlimits 538) 
 rate 281bps 3pps 
 lended: 319 borrowed: 185 giants: 0 injects: 0
 tokens: -12135 ctokens: 10773

-------------------------------------
tc qdisc show dev eth0
-------------------------------------
qdisc htb 1: r2q 10 default 400 dcache 0
 deq_util 1/83333 deq_rate 4 trials_per_deq 0
 dcache_hits 0 direct_packets 94066

-------------------------------------

tc filter show dev eth0
-------------------------------------

filter parent 1: protocol ip pref 3 fw 
filter parent 1: protocol ip pref 3 fw handle 0x1 classid 1:100 
filter parent 1: protocol ip pref 3 fw handle 0x2 classid 1:101 

-------------------------------------

iptables -t mangle -L
-------------------------------------

Chain PREROUTING (policy ACCEPT)
target     prot opt source               destination         


Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
MARK       all  -- sourcehost1           anywhere           MARK set 0x1 
MARK       all  -- sourcehost2  anywhere           MARK set 0x2 

Chain FORWARD (policy ACCEPT)
target     prot opt source               destination         

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination         
MARK       all  --  anywhere 		sourcehost1         MARK set 0x1 
MARK       all  --  anywhere 		sourcehost2 		MARK set 0x2 

Chain POSTROUTING (policy ACCEPT)
target     prot opt source               destination         



_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/