From mboxrd@z Thu Jan 1 00:00:00 1970 From: tslayer@phatchicks.com Date: Sun, 28 Apr 2002 15:06:51 +0000 Subject: Re: [LARTC] Problem with 2 DSL lines Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org I'd like to add to this. >From the local lan, I can't access either of the external interfaces(DSL #1, or DSL #2). Thanks, Eric On Fri, 26 Apr 2002 tslayer@phatchicks.com wrote: > Hey.. > > I have 2 DSL lines both going into Linux. > > I followed the HOWTO for Split Access at > http://lartc.org/HOWTO//cvs/2.4routing/html/x247.html#AEN251 > > I have the following: > > > I have 5 IPs on eth0 for DSL line #1. > I have 1 IP on eth2 for DSL line #2. > > > 192.168.0.0/24 is my local lan. I have iptables setup to SNAT to eth2 for > this local lan. > > Everything seems to work great except if I want to access any of the IPs > on eth0 from the local lan. I do a traceroute and it just hangs on the > 1st hop. > > > The default is via the gateway of DSL line #2. > > Any ideas? > > Thanks... > > > > > _______________________________________________ > LARTC mailing list / LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ > _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/