From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stef Coene Date: Tue, 30 Apr 2002 17:14:12 +0000 Subject: Re: [LARTC] htb & filter on classes Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org 0On Tuesday 30 April 2002 01:11, office@kabelweb.at wrote: > I am trying to do some simple filtering with htb and the following class > hierarchy: > > 1: > > 1:10 > / \ > 1:100 1:200 > / \ > 1:1000 ... > > Internal traffic should go to 1:200 and external traffic to 1:100 with > further distinction based on dst ip made there. > The problem is that I just don't get the second distinction (filter on > class 1:100) right. I have not found any working example where filters were > not attached to qdiscs but on classes instead. Is it possible to do so? If > yes: am I using the right syntax (parent 1:100)? The syntax is OK. But I don't think htb can do this (yet). Devik ? Stef -- stef.coene@docum.org "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/