From: "Muhammed Soyer" <msoyer@ges.net.tr>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] htb error
Date: Mon, 20 May 2002 10:30:07 +0000 [thread overview]
Message-ID: <marc-lartc-102189044926244@msgid-missing> (raw)
In-Reply-To: <marc-lartc-102188415722641@msgid-missing>
ok thnx
I should try this after the work hours :)
people should enjoy the limitless traffic now :)
----- Original Message -----
From: "Martin Devera" <devik@cdi.cz>
To: "Muhammed Soyer" <msoyer@ges.net.tr>
Cc: <lartc@mailman.ds9a.nl>
Sent: Monday, May 20, 2002 1:19 PM
Subject: Re: [LARTC] htb error
Yes .. try 3.4 - it should fix it. Let me know.
Hint: current patch can be reverted by patch -p1 -R .....
devik
On Mon, 20 May 2002, Muhammed Soyer wrote:
> The patch files name was htb3.3-020512.tgz (means 3.3 ? )
>
>
>
>
> ----- Original Message -----
> From: "Martin Devera" <devik@cdi.cz>
> To: "Muhammed Soyer" <msoyer@ges.net.tr>
> Cc: <lartc@mailman.ds9a.nl>
> Sent: Monday, May 20, 2002 12:35 PM
> Subject: Re: [LARTC] htb error
>
>
> Hello,
>
> what HTB version are you using ?
>
> On Mon, 20 May 2002, Muhammed Soyer wrote:
>
> > Hi,
> > I am tryin to shape my routers traffic ..I have read lartc document .HTB is suggested there .So I used htb ..My kernel is 2.4.18 .I patched my kernel and activated the supports ..
> > I have created my classes as follows
> >
> > tc qdisc add dev eth2 root handle 1: htb default 14
> > tc class add dev eth2 parent 1: classid 1:1 htb rate 2mbit ceil 2mbit
> > tc class add dev eth2 parent 1:1 classid 1:10 htb rate 700kbit ceil 1700kbit
> > tc class add dev eth2 parent 1:1 classid 1:11 htb rate 200kbit ceil 1250kbit
> > tc class add dev eth2 parent 1:1 classid 1:12 htb rate 600kbit ceil 1700kbit
> > tc class add dev eth2 parent 1:1 classid 1:13 htb rate 200kbit ceil 1700kbit
> > tc class add dev eth2 parent 1:1 classid 1:14 htb rate 300kbit ceil 1700kbit
> >
> > tc qdisc add dev eth2 parent 1:10 handle 10: sfq perturb 10
> > tc qdisc add dev eth2 parent 1:11 handle 20: sfq perturb 10
> > tc qdisc add dev eth2 parent 1:12 handle 30: sfq perturb 10
> > tc qdisc add dev eth2 parent 1:13 handle 40: sfq perturb 10
> > tc qdisc add dev eth2 parent 1:14 handle 50: sfq perturb 10
> >
> > tc filter add dev eth2 protocol ip parent 1:0 prio 1 u32 match ip dst 194.x.x.254 match ip sport 80 0xffff flowid 1:10
> > tc filter add dev eth2 protocol ip parent 1:0 prio 1 u32 match ip dst 194.x.x.254 flowid 1:11
> > tc filter add dev eth2 protocol ip parent 1:0 prio 1 u32 match ip dst 194.x.x.250 flowid 1:12
> > tc filter add dev eth2 protocol ip parent 1:0 prio 1 u32 match ip dst 194.x.x.200 flowid 1:13
> >
> > At the begining every thing works fine ..But when overlimits begins to occur the class having overlimits hangs the traffic related to that class
> > I have got error messages in syslog as follows
> >
> > May 20 09:40:07 gesrouter kernel: HTB: bad diff in charge, diff=3938700 now=1894047744 then=4294959104 j=46368551
> > May 20 09:40:07 gesrouter kernel: HTB: bad diff in charge, diff=3938700 now=1894072320 then=4294959104 j=46368554
> > May 20 09:40:07 gesrouter kernel: HTB: bad diff in charge, diff=3938700 now=1894096896 then=4294959104 j=46368557
> > May 20 09:40:07 gesrouter kernel: HTB: bad diff in charge, diff=3938700 now=1894121472 then=4294959104 j=46368560
> > May 20 09:40:07 gesrouter kernel: HTB: bad diff in charge, diff=3938700 now=1894146048 then=4294959104 j=46368563
> > May 20 09:40:07 gesrouter kernel: HTB: bad diff in charge, diff=3938700 now=1894170624 then=4294959104 j=46368566
> > May 20 09:40:07 gesrouter kernel: HTB: bad diff in charge, diff=3938700 now=1894195200 then=4294959104 j=46368569
> > May 20 09:40:07 gesrouter kernel: HTB: bad diff in charge, diff=3938700 now=1894219776 then=4294959104 j=46368572
> > May 20 09:40:07 gesrouter kernel: HTB: bad diff in charge, diff=3938700 now=1894244352 then=4294959104 j=46368575
> > May 20 09:40:07 gesrouter kernel: HTB: bad diff in charge, diff=3938700 now=1894268928 then=4294959104 j=46368578
> >
> >
> > these messages continue for ever..
> >
> > What can the problem be ?
> >
> >
> > --------------------------------------------------------------------------------
> >
> > Muhammed Soyer
> >
> >
> >
> >
>
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
>
>
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
>
>
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
prev parent reply other threads:[~2002-05-20 10:30 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-05-20 8:45 [LARTC] htb error Muhammed Soyer
2002-05-20 9:35 ` Martin Devera
2002-05-20 10:08 ` Muhammed Soyer
2002-05-20 10:19 ` Martin Devera
2002-05-20 10:30 ` Muhammed Soyer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-lartc-102189044926244@msgid-missing \
--to=msoyer@ges.net.tr \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.