From mboxrd@z Thu Jan 1 00:00:00 1970 From: Alexey Talikov Date: Mon, 27 May 2002 09:58:56 +0000 Subject: Re: [LARTC] htb faq Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lartc@vger.kernel.org See chapter 5 on http://luxik.cdi.cz/~devik/qos/htb/manual/userg.htm The burst and cburst of a class should always be at least as high as that o= f any of it children The burst and cburst parameters control the amount of data that can be sent= at the maximum=20 (hardware) speed without trying to serve another class (cburst-ceil burst-r= ate) i.e. class borrowed on rate it used burst on ceil it used cburst=20 It possible in this case when ancestor borrwed all traffic from his descend= ant and=20 ancestor of this ancestor borrowed all traffic from it Any problem ??? 27.05.2002 13:54:16, Juli=E1n Mu=F1oz wrote: >On Sun, 26 May 2002, Martin Devera wrote: > >> cburst is for ceil rate and burst is for normal rate. >> or >> rate has burst >> ceil has cburst >> >> probably it is not clear from the manual ? > >No :-) > >So it means that when traffic is borrowed cburst is used, else burst ? > > > >--=20 >Saludos de Juli=E1n >EA4ACL >-.- > > >_______________________________________________ >LARTC mailing list / LARTC@mailman.ds9a.nl >http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ > ----------------------------------- mailto:alexey_talikov@texlab.com.uz BR Alexey Talikov FORTEK ----------------------------------- _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/