From mboxrd@z Thu Jan 1 00:00:00 1970 From: Alexey Talikov Date: Thu, 30 May 2002 04:03:16 +0000 Subject: Re: [LARTC] TC Filter specifing multiple ports Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Use -j MARK in iptables and futher use this mark in tc filter 30.05.2002 4:16:38, "Steven Schmidt" wrote: >Hi All, > >Anybody know if a range of ports can be specified within a tc filter >statement > >i.e. >tc filter add dev eth 0 parent 10:1 protocol ip prio 10 u32 match ip dport >???? flowid 10:100 > >Works fine with a single port but can't find any spec for multiple ports. > >Cheers >Steve. > > >_______________________________________________ >LARTC mailing list / LARTC@mailman.ds9a.nl >http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ > ----------------------------------- mailto:alexey_talikov@texlab.com.uz BR Alexey Talikov FORTEK ----------------------------------- _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/