From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?ISO-8859-1?Q?Juli=E1n_Mu=F1oz?= Date: Thu, 30 May 2002 10:04:59 +0000 Subject: Re: [LARTC] IMQ losing marks ?? Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lartc@vger.kernel.org Gasp, Comparing my ingress with my egress config, I found I forget this: tc filter add dev imq0 protocol ip parent 1: prio 1 fw In the imq config, that's why it didn't work I suppose :-( On Wed, 29 May 2002, Martin Devera wrote: > > > > > > > >So, the " --set-mark 0x10020" trick is not working in this case ?? > > > > > > > > > > Yes, it is the conclusion. With "tc filter" the packets go to the desir= ed > > queue, Devik's trick doesn't work in this case :-) > > I'm interested here. Do you want why didn't it work ? > > devik > > _______________________________________________ > LARTC mailing list / LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ > > --=20 __o _ \<_ (_)/(_) Saludos de Juli=E1n EA4ACL -.- Foro Wireless Madrid http://opennetworks.rg3.net _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/