From mboxrd@z Thu Jan 1 00:00:00 1970 From: Martin Devera Date: Wed, 05 Jun 2002 21:11:43 +0000 Subject: Re: [LARTC] installing HTB Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org OR you can use binary in tar - the iproute compilation is not needed then. devik On Wed, 5 Jun 2002, Stef Coene wrote: > On Wednesday 05 June 2002 20:33, Chris K Ellsworth wrote: > > when i go to install htb i know i need to patch the kernel (DONE) > > and do i need grab the iprotue2+tc and patch then make or just use the tc > > binary from the tgz file and replace the tc file curently located on the > > system? > You also need to patch iproute and compile a new tc binary. > > Stef > > -- > > stef.coene@docum.org > "Using Linux as bandwidth manager" > http://www.docum.org/ > #lartc @ irc.openprojects.net > _______________________________________________ > LARTC mailing list / LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ > > _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/