From mboxrd@z Thu Jan 1 00:00:00 1970 From: Alexander Atanasov Date: Thu, 06 Jun 2002 22:15:10 +0000 Subject: Re: [LARTC] Bandwidth allocation by IP Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Thu, 6 Jun 2002, Vladimir Trebicky wrote: > Well, I took 0.2 version, I compiled it as a module - no problem. > tc qdisc add dev eth1 root handle 1: esfq hash dst > - ok > but then I started in one moment to upload (via eth1 of course) 3 scp's. The > first 2 were uploading on ip A and the third was uploading on ip B. But all > those three threads were uploading with eqaul rate. Either I missed > something (it's not so rare) or something went wrong... > > what do you thing? You attached esfq as your root qdisc it have 10/100MBits bandwidth. 3 SCPs can hardly fill up a 10/100MBits link - each one should send data 3.33/33.3MBits , i guess they send less. -- have fun, alex _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/