From mboxrd@z Thu Jan 1 00:00:00 1970 From: Martin Devera Date: Fri, 07 Jun 2002 19:06:29 +0000 Subject: Re: [LARTC] Ethloop? Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org > Thank you for you answer, 1:10 is incresed but 1:20 is also increased and > increase to the specific rate if I add 100kbps to every line. sounds weird. With higher prio 1:10 should get 90k and 1:11 10k. > In my case, I would like to put all the extra to 1:10 only, is that means > I have to give 1:11 ceil to 10kbps. If it is, is that means I don't need > prio paramter? How prio parameter works? your understanding is ok, tge ceil 10k is correct - the prio is meant for lowering delay and change in excess distribution is only "secondary" product. Port the resulting graph somewhere so I can look at it. devik _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/