From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Ivan A. Beveridge" Date: Sat, 22 Jun 2002 15:43:01 +0000 Subject: [LARTC] bonding & vlan - kernel 2.4.18 (RHL7.3) Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hi, Hopefully this won't be too off-topic (I've seen both bonding & vlan mentioned on the list, but not really together). I've tried to get bonding (2 x 100Mb EEPro, but will want to try on 1000BaseT) and vlans to work together, but without luck. I can get them working fine (seemingly at least - I didn't tried bursting on the bonded port) individually. However, when I bond the ports together and then run vlans on top, it doesn't seem to work (although there are no errors when configuring the interfaces). FWIW, this is: * RedHat 7.3 ("customised" RH73 kernel - 2.4.18) * Intel EEPro 100Mb dual-port NIC * Extreme Summit4 switch. Any suggestions gratefully accepted. Ivan -- Ivan Beveridge _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/