From mboxrd@z Thu Jan 1 00:00:00 1970 From: Alexey Talikov Date: Mon, 24 Jun 2002 04:34:17 +0000 Subject: Re: [LARTC] About HTB3 Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org I can't answer you completely ( this question for kernel maintainers ) :( But as I know this value used for IRQ (see arch/i386/kernel/irq.c) different kernel timers (arch/i386/kernel/time.c) for SMP (multiprocessor) in APIC functions ASPI functions almost in all drivers even in PCI bus and ATM subsystem and many many other I have no idea about after-effects of change HZ ! I don't know about possibility to change this value only for traffic control functions ! I think change this value for Ix86 architecture not so simple ! If somebody have idea about this, share it with me ! 23.06.2002 14:39:59, bert hubert wrote: >Can you elaborate? I know of only the 'top' problem but most other things >work well. >If you raise HZ you will get more precise shaping and less bursty traffic. >Regards, >bert >http://www.PowerDNS.com Versatile DNS Software & Services >http://www.tk the dot in .tk >http://lartc.org Linux Advanced Routing & Traffic Control HOWTO ----------------------------------- mailto:alexey_talikov@texlab.com.uz BR Alexey Talikov FORTEK ----------------------------------- _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/