From mboxrd@z Thu Jan 1 00:00:00 1970 From: bert hubert Date: Thu, 04 Jul 2002 14:35:11 +0000 Subject: Re: [LARTC] how to control bridge traffic using imq Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Thu, Jul 04, 2002 at 04:00:22PM +0800, hanhbnetfilter wrote: > bridge was configured with "brctl" > three NIC was bind to br0 > imq and htb was used to control traffic. > #modprobe imq numdevs=3 > "htb scripts" > #iptables -t mangle -A PREROUTING -i br0 -j IMQ > --todev 1 > #ip link set imq1 up > but this can not do the traffic controling. > please tell me how can i do iptables does not function on bridge devices - there are reasons for this, I'm seeing if I can push the right people into submitting a patch though. Regards, bert -- http://www.PowerDNS.com Versatile DNS Software & Services http://www.tk the dot in .tk http://lartc.org Linux Advanced Routing & Traffic Control HOWTO _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/