From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stef Coene Date: Fri, 05 Jul 2002 21:43:21 +0000 Subject: Re: [LARTC] "Bug" in howto 4.2.1 Split access and other advice Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org > Yeah, that was quite clear. But what did you find particularly strange, > other than the style of writing (for which I'm *not* going to apologize > :))? - All the variables are fine to read, but it's nicer to have an example with real numbers. - "One creates two additional routing tables, say T1 and T2. These are added in /etc/iproute2/rt_tables" How do you do this ? - "ip route add $P1_NET dev $IF1 src $IP1 table T1" blablabla "ip route add $P1_NET dev $IF1 src $IP1" Why adding allmost the same route ???? - what's the right syntax for $P1_NET ???? I'm not a newbie (anymore, at least that's my opinion), I know what I can do with the tc command, but ip is sometimes a mistery to me. If I have some time, I will reread the chapter with the mind of a ip-newbie (no brain adaption needed) to try to update the chapter. But my mind is already on holiday, my body follows sunday :) At least for the next 2 weeks. Stef -- stef.coene@docum.org "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/