From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Vanitha" Date: Tue, 09 Jul 2002 06:41:42 +0000 Subject: Re: [LARTC] cbq & iptables nat problems Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org ----- Original Message ----- From: "ganesh kumar godavari" To: ; Cc: Sent: Tuesday, July 09, 2002 5:17 AM Subject: [LARTC] cbq & iptables nat problems Hello, To find out wether CBQ is SET on the device or not , use the command #ip link show This would show the queue attached to the device To find out the exact flow transmission in bits/bytes use iptraf. Regards Vanitha > Hey guys > > I've 2 questions: > > Question 1 > ################ > I want to see if the bandwidth allocation using cbq is working > properly or not > I looked into stef coene's beautiful document(http://docum.org) > for the monitor.pl. > I am not good at perl so can anyone help me to understand if there > is anyway I can check if the cbq is working. > _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/