From mboxrd@z Thu Jan 1 00:00:00 1970 From: Werner Almesberger Date: Sat, 20 Jul 2002 23:16:20 +0000 Subject: Re: [LARTC] DSMARK and Filters Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Tarek Amr wrote: > I have a root qdisc "DSMARK" with a CBQ qdisc attached in it > so I wanted to re classify the packets within the CBQ according to the mark > they have acquired at the DSMARK. But when I used a u32 filter "matching > on the ToS field" it failed, Yes, dsmark only changes the DS/ToS field (if at all) when the packet leaves dsmark, i.e. right before it hits the wire. > then I read that I have to use some kind of filter called tcindex, > but I really don't know it's syntax well, and what's the handles > parameter in it .. etc. Please read ftp://icaftp.epfl.ch/pub/linux/diffserv/misc/dsid-01.ps.gz - Werner -- _________________________________________________________________________ / Werner Almesberger, Buenos Aires, Argentina wa@almesberger.net / /_http://icapeople.epfl.ch/almesber/_____________________________________/ _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/