From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Jan Coppens" Date: Mon, 22 Jul 2002 09:59:14 +0000 Subject: [LARTC] Attacing a RED to a CBQ MIME-Version: 1 Content-Type: multipart/mixed; boundary="----=_NextPart_000_0029_01C23177.32F4ABC0" Message-Id: List-Id: To: lartc@vger.kernel.org This is a multi-part message in MIME format. ------=_NextPart_000_0029_01C23177.32F4ABC0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi all, I've create a cbq qdisc on an 100Mbit link and I attached a cbq class to = it with a rate of 15Mbit (borrow). Now I would like to attach a RED = qdisc to that class, but I'm a little confused by the REDs parameters. = What should I choose for the bandwidth (100Mbit or 15Mbit) and what are = some good values for min, max, limit and burst in my case? All help is appreciated thanks, Jan ------=_NextPart_000_0029_01C23177.32F4ABC0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable

Hi all,

I've create a cbq qdisc on an 100Mbit = link and I=20 attached a cbq class to it with a rate of 15Mbit (borrow). Now I would = like to=20 attach a RED qdisc to that class, but I'm a little confused by the = REDs=20 parameters. What should I choose for the bandwidth (100Mbit or 15Mbit) = and what=20 are some good values for min, max, limit and burst in my = case?

All help is appreciated

thanks,

Jan

------=_NextPart_000_0029_01C23177.32F4ABC0-- _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/