From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stef Coene Date: Mon, 29 Jul 2002 12:54:59 +0000 Subject: Re: [LARTC] Bridge with Traffic shaping Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org > If I understand correctly I can shape incoming traffic by setting > up a qdisc on eth0 and filters that match any of the ip addresses > in my public subnet sitting behind the linux box that currently does > the traffic shaping. But all traffic coming on eth0 is leaving eht1 and vice versa. So shaping incoming traffic on eth0 is the same as shaping outgoing traffic on eth1. > No packets seem to match any of the other classes although tcpdump > confirms that there are definitely traffic destined for the ip addresses > mentioned in my filters. Mhh. It should work. I will think about it tonight. Stef -- stef.coene@docum.org "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/