From mboxrd@z Thu Jan  1 00:00:00 1970
From: niels@wxn.nl
Date: Thu, 01 Aug 2002 08:14:45 +0000
Subject: RE: [LARTC] Multipath route problem
Message-Id: <marc-lartc-102818973219164@msgid-missing>
List-Id: <lartc.vger.kernel.org>
References: <marc-lartc-102812296912357@msgid-missing>
In-Reply-To: <marc-lartc-102812296912357@msgid-missing>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: lartc@vger.kernel.org

> After you apply the patches the Linux machine will need to be running NAT
in some manor.
> Because I have routers on each of my DSL lines I perform two 
> rounds of NAT or PAT. One in each router, and then again in the Linux
router.
> In doing the NAT/PAT you will need to give the outgoing interface each of
the 
> IP's that your routers will be translating to.

Have that up and running alrady ... :-)

> You will also want to dial in your DNS to servers for each IP block, 
> and load balance that as well.

What do you mean by that?

Hope that the patches work when I get my hands on them :-)

Regards, Niels
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/