From: "William L. Thomson Jr." <support@obsidian-studios.com>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] Advance Routing Guidance
Date: Thu, 15 Aug 2002 08:42:52 +0000 [thread overview]
Message-ID: <marc-lartc-102940156009885@msgid-missing> (raw)
In-Reply-To: <marc-lartc-102939645206458@msgid-missing>
On Thu, 2002-08-15 at 00:33, Arindam Haldar wrote:
> so my Question is-->possible without **MASQUERADE** ??..
No
> will the
> setup(as shown in docs) loadbalance for our real ip's ?? ..
Not without the Linux router performing NAT.
> what other things i have to consider ?..
I would consider doing some NAT in one way or another. In my case I
perform two consecutive rounds of NAT, one in each router, and again in
the Linux router.
In short, in order for Julian's patches to work and to load balance the
connections, the Linux router must be doing NAT. So I would look into a
topology in your network that would allow for the Linux router to
perform NAT. Otherwise I do not believe you will be able to load balance
your connections.
--
Sincerely,
William L. Thomson Jr.
Support Group
Obsidian-Studios Inc.
439 Amber Way
Petaluma, Ca. 94952
Phone 707.766.9509
Fax 707.766.8989
http://www.obsidian-studios.com
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
next prev parent reply other threads:[~2002-08-15 8:42 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-08-15 7:45 [LARTC] Advance Routing Guidance Arindam Haldar
2002-08-15 8:42 ` William L. Thomson Jr. [this message]
2002-08-15 15:34 ` Laurens van Alphen
2002-08-15 19:35 ` Arthur van Leeuwen
2002-08-15 21:06 ` Julian Anastasov
2002-08-16 14:52 ` Arindam Haldar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-lartc-102940156009885@msgid-missing \
--to=support@obsidian-studios.com \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.