From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?iso-8859-2?Q?Rados=B3aw_=A3oboda?= Date: Wed, 21 Aug 2002 14:59:37 +0000 Subject: Re: [LARTC] HTB and bridge... Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Tue, 20 Aug 2002, zain arrifa'i wrote: > does anyone know about HTB shaping in a bridging > machine? > I currently run my shaper box as bridge and something > is going strange, such as a class cannot send at rate > it supposed to. > I mean if anyone know something about bridging and its > htb shaping behavior. > thanks in advance. I don't know about HTB but I had such configuration: ,------------------------------. | ,-- eth0 -+--> Seg1 INET ----+-> ppp0 -- ROUTER --+ (bridge)| | (fwall) `-- eth1 -+--> Seg2 `------------------------------' and I succeded in firewalling and shaping one of the segments with CBQ (just limiting to some rate, in this example INET2kbit, seg1dkbit). It just worked, of course after applying the correct patches fr bridge firewalling into the kernel... -- ########################################## # | p0wer | # # __ | GG#1877248 | # # (oo) | p0wer@bojko.eu.org | # # / \/ \ Go away or I will replace you # # `V__V' with a very small shell script. # ########################################## _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/