From mboxrd@z Thu Jan  1 00:00:00 1970
From: Eric Leblond <eric@regit.org>
Date: Sat, 14 Sep 2002 12:14:18 +0000
Subject: Re: [LARTC] iptable for multiple ip address
Message-Id: <marc-lartc-103200579710313@msgid-missing>
List-Id: <lartc.vger.kernel.org>
References: <marc-lartc-103183780131074@msgid-missing>
In-Reply-To: <marc-lartc-103183780131074@msgid-missing>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
To: lartc@vger.kernel.org

Le jeu 12/09/2002 =E0 21:49, Jose Luis Domingo Lopez a =E9crit :
=20
> iptables -t nat -A POSTROUTING --out-interface $WAN_IF \
>     --jump SNAT --to-source $START_PUB_IP-$END_PUB_IP
>=20
> The only limitation I see with this approach is that IP addresses must
> be contiguous, but I think this is a typical scenario, because our ISP
> tend to give addresses in blocks :)

But you can put multiple --to-source so there's no limitation.

--
Eric Leblond
eric@regit.org

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/