Hi
I have two lucent wlancards and one 3com ethernet
card running on my box.
I'm running routing tables with iproute2 in order
to route all the packets correctly ... Now I wonder, I should be able to use
wondershaper on top of this, right?
When I try to run wondershaper, it does nothing,
and gives me lots of error messages ...
The beginning of them are quoted here (output with
-x activated in the beginning of the script):
+ DOWNLINK=1024
+ UPLINK=1024
+ DEV=eth1
+
NOPRIOHOSTSRC=80
+ NOPRIOHOSTDST=
+ NOPRIOPORTSRC=
+
NOPRIOPORTDST=
+ '[' '' = status ']'
+ tc qdisc del dev eth1 root
+ tc
qdisc del dev eth1 ingress
+ '[' '' = stop ']'
+ tc qdisc add dev eth1
root handle 1: cbq avpkt 1000 bandwidth 10mbit
RTNETLINK answers: Invalid
argument
+ tc class add dev eth1 parent 1: classid 1:1 cbq rate 1024kbit
allot 1500 prio 5 bounded isolated
RTNETLINK answers: Invalid argument
+
tc class add dev eth1 parent 1:1 classid 1:10 cbq rate 1024kbit allot 1600 prio
1 avpkt 1000
RTNETLINK answers: Invalid argument
+ tc class add dev eth1
parent 1:1 classid 1:20 cbq rate 921kbit allot 1600 prio 2 avpkt
1000
RTNETLINK answers: Invalid argument
+ tc class add dev eth1 parent
1:1 classid 1:30 cbq rate 819kbit allot 1600 prio 2 avpkt 1000
RTNETLINK
answers: Invalid argument
and so it continues on every single command-line
wondershaper tried to type in.
anybody have a clue, I would be
grateful
/Snowi3