From mboxrd@z Thu Jan  1 00:00:00 1970
From: "John Cushnie" <cushnie@csi.com>
Date: Thu, 26 Sep 2002 14:29:01 +0000
Subject: RE: [LARTC] Routing and Shaping using RedHat7.3
Message-Id: <marc-lartc-103305066306435@msgid-missing>
List-Id: <lartc.vger.kernel.org>
References: <marc-lartc-103297049229358@msgid-missing>
In-Reply-To: <marc-lartc-103297049229358@msgid-missing>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: lartc@vger.kernel.org

Hi,

Thanks for the pointer.
It was in fact the gateways to/from the Linux box not being defined 
correctly that caused the confusion and no-function of the routing.
All no in place and working.

Many thanks.
John.

  >>> -----Original Message-----
  >>> From: Zubio Ancartone [mailto:z@adsl-213-190-47-193.takas.lt] 
  >>> Sent: 25 September 2002 20:41
  >>> To: john@dallambarn.freeserve.co.uk
  >>> Subject: Re: [LARTC] Routing and Shaping using RedHat7.3
  >>> 
  >>> 
  >>> On Wednesday 25 September 2002 16:12, John Cushnie wrote:
  >>> 
  >>> What is your "remote host" default gateway? Do tcpdump on eth0.
  >>> 
  >>> > Hi all,
  >>> >
  >>> > I'm running RH7.3 plus errata.
  >>> > I've read through the HowTo and I had something like this 
  >>> > configuration working on RH7.1, but it looks like the 
  >>> interface to IP 
  >>> > and ROUTE has changed considerably since then.....
  >>> >
  >>> > I'm trying to set up a simple router configuration to 
  >>> route between 
  >>> > subnets, as shown in the diagram. My aim is to provide 
  >>> traffic shaping 
  >>> > between the 194.80.34.0 hosts and the 148.88.0.0 and 
  >>> 192.168.106.0 
  >>> > networks.
  >>> >
 
<Snip>


_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/