From mboxrd@z Thu Jan 1 00:00:00 1970 From: raptor Date: Thu, 26 Sep 2002 14:52:55 +0000 Subject: [LARTC] [tcng] and iptables Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org As we discused earlier in the list tcng still doesn't support ipchains/iptable/ip route marking and classifing based on this. So my question is how can I do this manualy i.e. find the desired class-ID ... and add additional tc-commands so that marked packets goes to the desired class. I need this for this :") eth0 ----> class X:Y eht1 ----> class Z:W f.e. everything coming from eth0 goes to 100kbps class and everything from eth1 to 50kbps. In fact it a litle bit harder : 3 frame realy channels (1 upstream/pvc0 and 2 downstream/pvc1,pvc2) and 2 eth. Example : if from pvc1 --> eth0 and ip_dst = 192.168.0.55 then 10kbps if from pvc2 --> eth0 and ip_dst = 192.168.0.55 then 15kbps if ip_src = 192.168.0.55 then 10kbps (dest is always pvc0 until i setup proxy) thanx raptor _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/