From mboxrd@z Thu Jan 1 00:00:00 1970 From: niels@wxn.nl Date: Wed, 02 Oct 2002 09:44:50 +0000 Subject: RE: [LARTC] Problem with windows routing Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org > I turned off sending redirects on both routers > but windows do it on their own I think Why? > Because the packet comes from LAN router but windows > has the default route to the inet router and the packet gets lost Your internet router does NAT I think? Then it seems logical.. > when I set the route table on some of those windows machines > manually it works fine but that's thing I cannot do by dhcpd Simplest solution is re-enabling redirects on the inet router (I don't see the problem only that the windows box builds a big route table with many single routes) Second simple solution is adding the routes to the second LAN manually on the windows boxes and use the -p switch... With -p they become permanent routes even if you restart the machine. Niels. _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/