From mboxrd@z Thu Jan  1 00:00:00 1970
From: "Martin A. Brown" <mabrown-lartc@securepipe.com>
Date: Wed, 02 Oct 2002 16:36:43 +0000
Subject: Re: [LARTC] to route a source address
Message-Id: <marc-lartc-103357666200775@msgid-missing>
List-Id: <lartc.vger.kernel.org>
References: <marc-lartc-103354095830192@msgid-missing>
In-Reply-To: <marc-lartc-103354095830192@msgid-missing>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: lartc@vger.kernel.org

Rimas,

I have noticed you asking a few questions to the list in the last few days 
about the use of "ip route".

The short answer on this one is:

# ip route add $DESTINATION from $SOURCE via $GATEWAY

Might I suggest the following:

My doc:

  http://plorf.net/linux-ip/   See appendix F -- "ip route"

The iproute2 manual:

  http://defiant.coinet.com/iproute2/ip-cref/   here, as HTML

Good luck,

-Martin

 : Hi folks,
 : 
 : How with "ip route" to route source address?
 : 
 : for example I want to route an internal (local) address to go via
 : specific gateway?
 : 
 : Thank you
 : 
 : Rimas
 : 

-- 
Martin A. Brown --- SecurePipe, Inc. --- mabrown@securepipe.com


_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/