From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Mario Ohnewald" Date: Thu, 10 Oct 2002 20:19:34 +0000 Subject: [LARTC] Simple Traffic Control Question (Howto) Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hello! I have read the Howto (Section 9 exspecially!) a few times. It might be the language that i not get this or whatever! I want to make sure that port 14567 (upd) is in a priority 1 band (Minimum Delay). Port 14567 is used by an Online game, a low ping is badly needed. I decided to use Token Bucket Filter ( i hope i have chosen the right one) (...)Note that we use 'tc class add' to CREATE classes within a qdisc, but that we use 'tc qdisc add' to actually add qdiscs to these classes.(...) 1.) Do i have to create a class first ? example: tc qdisc add dev ppp0 root handle 1: htb default 30 2.) then i have to add qdisc to a class? example: tc qdisc add dev ppp0 root tbf rate 220kbit latency 50ms burst 1540 3.) set filter ? example: tc filter add dev eth0 protocol ip parent 10: prio 1 u32 match ip dport 22 0xffff flowid 1:1 I have read the howto but i can not find my mistake! I hope u can help me, i am really new to this! Cheers, Mario _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/