From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?iso-8859-1?Q?=C1ngel_Carrasco?= Date: Thu, 24 Oct 2002 12:29:17 +0000 Subject: Re: [LARTC] NETWORK ROUTES Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lartc@vger.kernel.org Ok: My office network is: 172.16.16.0/24 and his IP is: 172.16.16.1. My web network is: 172.16.8.0/24 and his IP is: 172.16.8.1 My service network is: 172.16.4.0/24 and his IP is: 172.16.4.1 My public network is:213.250.143.240/28 and his IP is: 213.250.143.242. The public router is 213.250.143.241 (and only works with the range 213.250.143.240/28) The office router is 172.16.16.254 (and only works with the range 172.16.16.0/24) The static default route is 172.16.16.254 This is my route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 213.250.143.240 0.0.0.0 255.255.255.240 U 0 0 0 eth0 172.16.4.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 172.16.16.0 0.0.0.0 255.255.255.0 U 0 0 0 eth3 172.16.8.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2 0.0.0.0 172.16.16.254 0.0.0.0 UG 0 0 0 eth3 And my dinamic route to using the public network is: ip rule add from 213.250.143.242 table publica ip route add from default via 213.250.143.241 dev eth0 table publica ip route flush cache And the problem is when I try to use 213.250.143.242 in my internals networks doesnt run because the information goes by 213.250.143.241 and not in the normal routes. Can you help me, please? ----- Original Message ----- From: "Stef Coene" To: "=C1ngel Carrasco" ; Sent: Thursday, October 24, 2002 1:45 PM Subject: Re: [LARTC] NETWORK ROUTES On Thursday 24 October 2002 09:23, =C1ngel Carrasco wrote: > Hi all, > > I have a debian server with 4 network cards: > The first card is used to connect to public network and this network > connects with a big router. > The Second, third and fourth cards are used by other networks. > The first card used a dinamic route with the big router. > The other cards used a static route with a little router. > All runs good but my problem is when I try to use the IP of my first card > in my internals networks > doesn't work because, all information doesn't go by internals networks, it > goes by the big network. Can you clarify this a bit? Routes, ip-adresses, what you tried, what's working, what's not working, ... Stef -- stef.coene@docum.org "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/