From mboxrd@z Thu Jan 1 00:00:00 1970 From: Julian Anastasov Date: Fri, 25 Oct 2002 18:45:27 +0000 Subject: Re: Re: [LARTC] multipath routing problem [Shorter version] - Help Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hello, On Fri, 25 Oct 2002, Arthur van Leeuwen wrote: > > Now I see, then the TOS is a big problem for you. May > > be your problem will be solved if TOS is not a routing key but > > it does not sound as a thing that is easy to fix in kernel. > > Actually, you can simply play whack-a-mole with the TOS value, using > ipchains (or iptables), killing all TOS values present on the packets. > Ofcourse, this is not very *nice*, but it'll work. This is a good idea. Vincent, may be you can play with ipchains -t AND XOR in the input chain to see what happens. Just make sure you don't touch bits 0, 1, 5, 6, 7. It seems the routing uses only bits 2, 3 and 4 for routing key (if I'm not overlooking something). This is for kernel 2.4. For kernel 2.2 it seems bit 1 is also included in the routing key. 2.4 mask 0x1C, inverted 0xE3 2.2 mask 0x1E, inverted 0xE1 So, for 2.2 may be: ipchains -I input -d 0.0.0.0/0 22 -t 0xE3 0x00 What are the TOS values used during the SSH session? Regards -- Julian Anastasov _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/