From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rob Date: Mon, 28 Oct 2002 18:43:35 +0000 Subject: [LARTC] Fw: wondershaper kills eth0 :( Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hi, When i do 'wshaper start' the interface i have defined stops routing traffic for some reason. It resumes routing when i do 'wshaper stop'. I'm using debian stable (3.0 woody) with debian's default 2.4.18-686 kernel. When I run the script I get no errors, and when I do a 'status', everything looks correct. Can ANYONE please give me a little insight as to what to do? I have the variables set as follows: DOWNLINK50 UPLINK0 DEV=eth0 The machine is a NAT machine. I'm using shorewall to handle the NAT stuff for me. But even with shorewall disabled, wshaper still fails. Thank you for your help. -Rob _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/