From mboxrd@z Thu Jan 1 00:00:00 1970 From: Martijn Klingens Date: Thu, 31 Oct 2002 16:33:12 +0000 Subject: Re: [LARTC] Egress shaping over multiple interfaces? Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Thursday 31 October 2002 17:06, Stef Coene wrote: > Yes you can if you apply the needed patches to the kernel and iptables so > you can use the imq device. It's a virtual device and you can use the > normal cbq/htb/tbf qdiscs on it. You can redirect packets to it with > iptables and you can do it from any interface you want and also from IN + > OUT. So you can create 1 imq device, redirect all packets that leaves > hdlc0-2 and shape on that imq device. > IMQ link : > http://trash.net/~kaber/imq Thanks for the quick reply! Looks like I need this, since our provider uses a Cisco router and not a linux box, so teql is not an option :( Now I only hope this applies properly to our kernel... (btw, how stable is it? I'm always hesitant to use code that is not in the mainstream kernel on a production firewall). -- Martijn _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/