From mboxrd@z Thu Jan 1 00:00:00 1970 From: thomas bilke Date: Thu, 31 Oct 2002 20:32:17 +0000 Subject: Re: [LARTC] CBQ not properly functioning !? Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Stef Coene schrieb: > You can not shape incoming and outgoing traffic at the same time. You add the > cbq qdisc to dev eth0 so you can only shaping traffic that leaves eth0. Sorry, I think there is a tiff. I use a server which the shaped host is connected to. So the device eth0 is on the server to ISP. The other device eth1 on the server is directed to the local Network. Thomas _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/