From mboxrd@z Thu Jan  1 00:00:00 1970
From: thomas bilke <thomas.bilke@post.rwth-aachen.de>
Date: Thu, 31 Oct 2002 22:50:28 +0000
Subject: Re: [LARTC] CBQ not properly functioning !?
Message-Id: <marc-lartc-103610451421265@msgid-missing>
List-Id: <lartc.vger.kernel.org>
References: <marc-lartc-103609384708269@msgid-missing>
In-Reply-To: <marc-lartc-103609384708269@msgid-missing>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: lartc@vger.kernel.org

Stef Coene schrieb:

> Again, you can only shape outgoing traffic.  If eth0 is connected to your isp
> and you add the qdisc to eth0, then you can only shaping traffic going to
> your isp.
> Is the x.x.x.x host on your LAN ??

Yes, the host is in my LAN. But I want to shape the incoming and outgoing traffic
corresponding to this host, or later to the whole LAN. Doesn't exist any facility
to shape the incoming traffic?

Thomas


_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/