From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Martin A. Brown" Date: Fri, 08 Nov 2002 18:06:57 +0000 Subject: Re: [LARTC] Route Vlans Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lartc@vger.kernel.org Laurent, You should be able to do it with some elbow grease and Ben Greear's linux=20 vlan implementation. =20 http://www.candelatech.com/~greear/vlan.html This allows you to attach a single ethernet device to an 802.1q port on=20 your switch, and configure multiple interfaces for each VLAN. If you want to route, just turn the box into a router--sure it has only=20 one ethernet cable, but it has multiple interfaces, right? I have no experience with it. Good luck,=20 -Martin : Hello, :=20 : Is it possible with a linux Bow to route diff=E9rents VLANs, like a rout= er :=20 : cisco can does ? :=20 : Thank for your answers :=20 : Laurent Foucher :=20 : _______________________________________________ : LARTC mailing list / LARTC@mailman.ds9a.nl : http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ :=20 --=20 Martin A. Brown --- SecurePipe, Inc. --- mabrown@securepipe.com _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/